ASSEMBLY INSTRUCTIONS
1. Ensure the air intake is clear of obstructions and the zipper is fully closed. Some inflatables have more than one zipper.
2. Connect the power supply into fan then plug into standard wall outlet.
3. Using the bottom loops to insert the included stakes into the ground. Adjust weight bag to position your inflatable.
4. Once inflated, clip the tethers to the side loops.
5. Drive the stakes into ground at a 45-degree angle.
6. Bring the tether down to a 45-degree angle from the inflatable. You may need to wrap the excess tether around the top of the stake.
DO’S AND DONT’S
1. Do check your inflatable daily and adjust to stand up straight.
2. Do not attempt to operate your inflatable in unusually strong winds.
3. Do not unplug by pulling on cord.
For temporary (90 days max) installation and use only.
TROUBLESHOOTING CHECKLIST
If your Airblown® Inflatable is not inflating, the problem may be:
1. The power source is disabled or the cord may be uplugged.
2. The Airblown® Inflatable may not be fully sealed. Check to ensure the zipper is fully closed.
3. Something may be blocking the fan’s air intake.
NOTE: Once the fan is unplugged and stops blowing, your Airblown® Inflatable will deflate. For faster deflation, unzip the zipper after unplugging the power supply.